Molded two-tone gray space-age polymer with softly rounded edges. Resistant to impact, wear, corrosion, heat and sunlight.
Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain. Anti-splash design reduces splatter. Contour design and integral strainer insure proper drainage.
Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water.
Push Bar Actuation Mechanism
Self-closing light-touch push bars require minimal pressure to activate.
Automatic Stream Height Regulator
Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi.
Solenoid Valve/Inlet Strainer
Self-closing solenoid valve includes easily cleaned in-line strainer that screens particles of 140 microns or larger before they enter the waterway.
Positive sensing thermostat for controlling temperature of storage tank water. Factory set at 50° F Adjustable ± 5° F.
Non-pressurized stainless steel evaporator/storage tank for long life. Waterways are certified to NSF/ANSI 61, far exceeding the requirements of the Safe Drinking Water Act.
Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and fan cooled copper/aluminum condenser with self-lubricated bearing. System uses R134A refrigerant. Protected by Halsey Taylor’s Limited 5 Year Warranty.
Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet louvers to wall.
Shall deliver ( ) GPH of 50° F water at 90° F ambient and 80° F inlet water. Shall have stainless steel basin with integral drain strainer. Bubbler shall be two-stream, mound building type. Separate valve and automatic stream regulator shall be mounted within cabinet. Refrigeration system shall employ high efficiency, positive start compressor using R134A, non-pressurized tank with totally encapsulated insulation and be controlled by positive sensing thermostat. Shall have push-bar water controls. Cooler shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Unit complies with ARI Standard 1010.
NOTE: Water will not flow from bubbler unless unit is connected to electricity.
Features and Benefits
Impact Resistant. Voyager’s durable construction makes it an ideal water cooler for high-traffic areas.
No Sharp Corners or Louvers. The unique, contemporary design incorporates rounded corners and smooth edges for a safer unit.
Easy-to-Install. The large opening in the back makes most retrofit applications easier.
Easy to Service. Routine service can be performed through the front of the unit.
ADA Compliant. The barrier-free Voyager meets requirements of ADA for both children and adults.
Quieter. Voyager’s finely engineered components and refrigeration system run smoothly and quietly.
Easy-to-Clean. Voyager’s molded, smooth construction makes it easy to clean with a damp cloth or mild detergent.
Stainless Steel Basin with Integral Strainer. Non-corrosive, stainless steel contoured basin has a satin finish that resists stains, while its anti-splash design reduces splatter and insures proper drainage.
Double Bubbler. Patented Double Bubbler has two streams of water that converge to provide a fuller, more satisfying drink.
Halsey Taylor offers outdoor water coolers, water coolers for schools, parks and shopping centers, floor-mounted and wall-mounted coolers, and fountains in a variety of shapes and styles. Our durable and attractive finishes further reflect our concern for our products appearance, as well as their ability to withstand the test of time.