Elkay Drinking Fountain Parts

The Elkay / Halsey Taylor 61314C Green Spring Cartridge Regulator is one of the most commonly replaced parts in a drinking fountain. It functions as both an on/off valve and a flow regulator.

The Elkay / Halsey Taylor 61313C Red Spring Cartridge Regulator is one of the most commonly replaced parts in a drinking fountain. It functions as both an on/off valve as well as an adjustable flow regulator. It is used on Elkay and Halsey Taylor drinking fountains with a pushbutton

The Elkay 92450C Cartridge Housing is used in Elkay and Halsey Taylor drinking fountains.

The housing holds the cartridge (NOT included) in place.

The Elkay/Halsey Taylor 98531C Green Spring Cartridge Housing Kit is a convenient pre-assembled kit. It will fit in most Elkay/Halsey Taylor drinking fountains with a front push bar and will solve most run on or water leaking issues. Housing is labeled “in” to show where to connect the supply line to, making it an easy installation.

This Elkay / Halsey Taylor 98530C Red Spring Cartridge Housing Kit is a pre-assembled kit that includes the red spring cartridge and the housing. This kit fits most Elkay and Halsey Taylor drinking fountains with a pushbutton.

The Elkay Strainer 55996C is located at the water inlet of the drinking fountain. The strainer collects and traps any sediment that may damage the valve or other components of the drinking fountain. It fits Elkay and Halsey Taylor drinking fountains.

The Elkay Bubbler Head Kit 92715C is used on most Elkay drinking fountains models. The “Flexi-Guard” flexible top helps prevent dental injuries. The bubbler comes with the mounting nut and a piece of 1/4 tubing. The tubing may not be necessary if you have plastic tubing connecting to the bubbler.

The Elkay / Halsey Taylor 98501C Flexi-Guard StreamSaver Bubbler Head Kit is a bubbler head designed to reduce water usage by nearly 40% over the average market performance.

Note: Nut not included

The Elkay Solenoid Valve 35981C is found in the Elkay EZ and Halsey Taylor HTV series water coolers. It is used on units that have a serial number that starts with numbers lower than 0807.

For units with serial numbers that are higher than 0807 use 98466C

The Elkay 55999C Front Push Bar is found on the Elkay EZ series drinking fountains. The plastic push bar measures 10” long x 2 3/16” wide. On the back, there are 3 plastic tabs which are prone to breaking when someone forcefully pushes on it. This makes it one of the most commonly replaced part on the Elkay EZ series drinking fountains.

The Elkay 56229C Upper Shroud is for Elkay EZ series drinking fountains with front and side push bars. This shroud mounts between the upper basin and the main frame of the drinking fountain. The shroud assembly comes with the pushbars, switches, and wiring harness already installed.

The Elkay 56002C Side Push Bar fits on Elkay EZ series drinking fountains. This plastic push bar fits either the left or right side of the unit. When the user presses the push bar, it contacts the switches which send power to the solenoid and activate the water flow. On the back of the pushbar there are two tabs that hold the handle in the shroud assembly.

The Elkay / Halsey Taylor 51531C Pivot Block fits many older Elkay and Halsey Taylor drinking fountains with push bars. This plastic pivot block mounts inside the drinking fountain. The pivot pin which is attached to the push bar fits into this block. Together the two parts act as a hinge for the push bar to pivot on.

The Elkay / Halsey Taylor 50212C Pivot Block Pin works with Elkay and Halsey Taylor drinking fountains.

The pivot block pin snaps into the metal push handle and sits inside the pivot block.

The Elkay Cold Control Thermostat 31513C is an adjustable cold control thermostat. This thermostat controls the cooling system to regulate the temperature of the chilled water in most Elkay and Halsey Taylor drinking fountains. There are two male electrical terminals and one metal sensing lead.

The Elkay / Halsey Taylor 35948C Push Bar Switch mounts behind the push bar. It has two male spade wire connectors.

When the push bar is pressed, this switch sends power to the solenoid which activates the water flow.

The Elkay 51299C Replacement Filter (for EWF172) is a replacement filter for the EWF172 filter kit. It is designed to remove cysts, lead particles, and chlorine. It will also remove odors, and improve the taste of the water.

The Elkay Cartridge Holder 50986C is used in most Elkay and Halsey Taylor drinking fountains. The housing holds the cartridge(not included). The housing has internal coarse threads for the cartridge retaining nut, and fine external threads for the nut that holds the housing in place. The water inlet and outlet are 1/4” quick connect fittings.

The Elkay / Halsey Taylor 15005C Cartridge Retaining Nut is a plastic nut that holds the cartridge in the housing. This coarse thread nut is for use with newer coarse thread housings.

The Elkay 51551C Gray Basin Trim is a plastic trim that wraps around the basin top of Elkay EBF series drinking fountains.

The Elkay 98466C Solenoid Valve is for Elkay EZ series 1C Revision drinking fountains.

It is used on units that have a serial number that starts with numbers higher than 0807. For units with serial numbers that are lower than 0807 use 35981C

The Elkay / Halsey Taylor 56092C Plastic Tubing 1/4” x 48” is used in Elkay and Halsey Taylor drinking fountains.

The tubing is used as water lines within the drinking fountain.

The Elkay / Halsey Taylor 36158000 Spanner Wrench is used to take the cartridge retaining nut out of the cartridge regulator holder.

The Elkay / Halsey Taylor 70793C Elbow Fitting 1/4” uses 1/4” snap-in fittings.

The elbow fitting is used for splitting water lines inside of the drinking fountain.

The Elkay / Halsey Taylor 60290C Cartridge Regulator is used in stainless steel, push button bubbler heads.

The cartridge regulator controls the on/off of water flow and the amount of water pressure.

This is a genuine Elkay / Halsey Taylor 70836C John Guest Elbow Fitting 3/8 X 1/4.

This is a genuine Elkay / Halsey Taylor 70870C John Guest Union 3/8”.

This is a genuine Elkay / Halsey Taylor 70852C John Guest T Coupling 3/8” x 3/8” x 3/8”.

This is a genuine Elkay / Halsey Taylor 70817C John Guest Fitting, 1/4” 90* Elbow F & M.

This is a genuine Elkay or Halsey Taylor 75583C John Guest Elbow 1/4” x 5/16”.

The Elkay 70682C John Guest Tee Coupling 1/4” x 1/4” x 1/4” uses 1/4” snap-in fittings.

The tee coupling is used for splitting water lines inside of the drinking fountain.

The Universal 1020888 Soft Top Bubbler Head Stainless Steel is a soft top bubbler head with a push button.

The Universal 7800 Bubbler Head Stainless Steel is a universal push button bubbler head. This bubbler is used on many different models of drinking fountains.

The Universal Bubbler Head Conversion Kit will retrofit older twist style valves to a push button bubbler head.

This is a genuine Universal Bubbler Head Conversion Kit (Lead-Free).

The Elkay / Halsey Taylor 98164C Press In Fitting Replacement Kit 1/4” is used to repair any 1/4” press in fitting connection. This kit will work for most manufacturers.

This kit includes the parts to repair one connection point.

The Elkay 22932C Front Panel Grey Beige is for use on Elkay drinking fountains.

The Elkay / Halsey Taylor 55884C Drain Elbow 1-1/4” is hard plastic and has a bottom threaded male end. It works with drain gasket #102742.

The drain elbow connects to the drain.

The Universal 96852CA Glass Filler Kit can be added to most drinking fountains.

The Elkay 56118C Drain Gasket fits in Elkay EZ series drinking fountains.

The drain gasket seals the drain assembly to the basin and will not work with 2 pin drain brackets. It will only work with the 3 pin drain bracket which is part number 106092 (56182C).

The Elkay EWF172 Water Filter Kit is a universal fit water filter. It is designed to remove cysts, lead particles, and chlorine. It also removes odors and improves taste.

The Elkay LF2 In-Line Water Filter Kit is an in-line water filter designed to remove cysts, lead particles, and chlorine. This filter includes mounting hardware and fittings.

This is a genuine Elkay / Halsey Taylor 56192C In-Line Replacement Filter.

The Elkay / Halsey Taylor 10031C Retaining Nut has two holes on top of the nut.

The retaining nut holds the cartridge regulator in the housing.

The Elkay / Halsey Taylor 40089C Bonnet Nut Chrome is found on Elkay and Halsey Taylor drinking fountains. It is located just above the cartridge regulator.

The bonnet nut holds the push button.

The Elkay / Halsey Taylor 40169C Hex Nut Chrome is used to hold the cartridge regulator housing.

The Elkay / Halsey Taylor 31025C Overload Relay is a common part used on Elkay and Halsey Taylor drinking fountain compressors.

The Elkay 28401C Wall Hanger Bracket is a metal bracket used to hang Elkay EZ series drinking fountains on the wall.

The Elkay / Halsey Taylor 56082C Cartridge Hold Open Nut holds the cartridge open automatically.

The Elkay 36196C Overload is a common part for Elkay drinking fountain compressors.

The Elkay / Halsey Taylor 10-01471-40-560 Drain Gasket is a rubber drain gasket that fits against the drain elbow #102495.

The drain gasket creates a seal so water doesn’t leak.

The Elkay / Halsey Taylor 40048C Push Button Chrome is a chrome push button.

Pressing the push button activates water flow.

The Elkay 31490C Fan Motor is an electric, 110-120 volt fan motor.

The Elkay / Halsey Taylor 10-03227-40-560 Flat Black Gasket is a a 1” diameter gasket.

The gasket is used to create a seal to prevent leaks.

This is a genuine Halsey Taylor 15009C Bubbler Head Nipple.

This is a genuine Elkay / Halsey Taylor 31272C Solenoid Valve.

The Elkay 40322C Stream Breaker threads into bubbler parts #101066 and #107271. It comes with a diverter assembly.

The stream breaker creates a smooth flow of water out of the bubbler head.

The Elkay 50074C Drain Gasket goes in-between the strainer and the basin in Elkay drinking fountains.

The drain gasket seals against leaks.

The Elkay / Halsey Taylor 11-14117-43-620 Nut 1/4” is a self-threading stamped nut.

The nut threads onto plastic studs to secure a push bar in place.

The Elkay / Halsey Taylor 50377C Drain Gasket is a common replacement when there is a leak under the drain.

The drain gasket prevents leaking from the drain.

The Elkay 51559C Front Push Bar Grey is designed for Elkay EBF series drinking fountains.

When the user presses the push bar, it turns on the water flow out of the bubbler head.

The Elkay LK 464 Drain Assembly includes the gasket, strainer, 1-1/4” flange, and p-trap.

The Elkay 26590C Front Panel Grey Beige is used on Elkay EHF series drinking fountains.

The front panel is the frame for the front push bar.

The Elkay / Halsey Taylor 40575C Drain Assembly includes the drain strainer and the chrome-plated ferrule.

The Elkay / Halsey Taylor 22574C Regulator Mounting Bracket fits in Elkay and Halsey Taylor drinking fountains.

The regulator mounting bracket holds the housing and cartridge regulator in place.

The Elkay 21696C Push Bar Mounting Bracket is used on Elkay EHF series drinking fountains.

The mounting bracket is used to hold the push bar in place.

The Elkay / Halsey Taylor 40045C Hex Nut fits on Elkay and Halsey Taylor drinking fountains.

The hex nut holds the cartridge and housing in line. It also holds the housing to the mounting bracket.

The Elkay / Halsey Taylor 40572C Tailpipe 1-7/8” is 1-7/8”.

The tailpipe refers to the pipe running from the drain down to the waste line.

The Elkay / Halsey Taylor 40619C Tailpipe Ferrule is for Elkay and Halsey Taylor drinking fountains.

The tailpipe ferrule surrounds the drain on the top of the drinking fountain.

The Elkay 22901C Side Push Bar Bracket is a metal bracket behind the side push bar.

The bracket holds the push bar in place and activates the solenoid valve once the push bar is pressed.

The Elkay 22900C Front Push Bar Bracket is the metal bracket that goes behind the front push bar.

The bracket holds the push bar in place and activates the solenoid valve once the push bar is pressed.

The Elkay 45336C Drain Assembly threads into the drain. The assembly includes the drain flange and strainer.

This is a genuine Elkay / Halsey Taylor 31341C Fan Motor.

Kit includes:

• 12 – O-Ring
• 1 – O-Ring
• 4 – O-Ring
• 1 – 1/4 Super Seal
• 1 – 3/8 Super Seal
• 6 – 1/4” Collete
• 1 – 3/8” Collete
• 1 – 1/4” Poly Tubing
• 1 – 3/8” Poly Tubing

Kit Includes:

• 1 – Cover
• 1 – Button
• 1 – Hex Nut
• 1 – Regulator Holder
• 1 – Retaining Nut
• 1 – Regulator