Elkay Drinking Fountain Parts

The Elkay / Halsey Taylor 35948C Push Bar Switch mounts behind the push bar. It has two male spade wire connectors.

When the push bar is pressed, this switch sends power to the solenoid which activates the water flow.

The Elkay 51299C Replacement Filter (for EWF172) is a replacement filter for the EWF172 filter kit. It is designed to remove cysts, lead particles, and chlorine. It will also remove odors, and improve the taste of the water.

The Elkay Cartridge Holder 50986C is used in most Elkay and Halsey Taylor drinking fountains. The housing holds the cartridge(not included). The housing has internal coarse threads for the cartridge retaining nut, and fine external threads for the nut that holds the housing in place. The water inlet and outlet are 1/4” quick connect fittings.

The Elkay / Halsey Taylor 15005C Cartridge Retaining Nut is a plastic nut that holds the cartridge in the housing. This coarse thread nut is for use with newer coarse thread housings.

The Elkay 51551C Gray Basin Trim is a plastic trim that wraps around the basin top of Elkay EBF series drinking fountains.

The Elkay Solenoid Valve 98466C is found in the Elkay EZ and Halsey Taylor HTV series water coolers with a model number that ends with an “C” or “D” or with a serial number that is higher than 0807xxxxx.
For Elkay / Halsey Taylor series water coolers with a model number that ends with a “A” or “B” or with a serial number that is lower than 0807xxxxx use part number 35981C

The Elkay / Halsey Taylor 56092C Plastic Tubing 1/4” x 48” is used in Elkay and Halsey Taylor drinking fountains.

The tubing is used as water lines within the drinking fountain.

The Elkay / Halsey Taylor 36158000 Spanner Wrench is used to take the cartridge retaining nut out of the cartridge regulator holder.

The Elkay / Halsey Taylor 70793C Elbow Fitting 1/4” uses 1/4” snap-in fittings.

The elbow fitting is used for splitting water lines inside of the drinking fountain.

The Elkay / Halsey Taylor 60290C Cartridge Regulator is used in stainless steel, push button bubbler heads.

The cartridge regulator controls the on/off of water flow and the amount of water pressure.

This is a genuine Elkay / Halsey Taylor 70836C John Guest Elbow Fitting 3/8 X 1/4.

This is a genuine Elkay / Halsey Taylor 70870C John Guest Union 3/8”.

This is a genuine Elkay / Halsey Taylor 70852C John Guest T Coupling 3/8” x 3/8” x 3/8”.

This is a genuine Elkay / Halsey Taylor 70817C John Guest Fitting, 1/4” 90* Elbow F & M.