Halsey Taylor Parts

Kit Includes:

• 1 – Overload
• 1 – Relay
• 1 – Cover

Kit includes:

• 1 – Bubbler
• 1 – Bubbler Nipple
• 2 – O-Ring

Kit includes:

• 12 – O-Ring
• 1 – O-Ring
• 4 – O-Ring
• 1 – 1/4 Super Seal
• 1 – 3/8 Super Seal
• 6 – 1/4” Collete
• 1 – 3/8” Collete
• 1 – 1/4” Poly Tubing
• 1 – 3/8” Poly Tubing

This is a genuine Elkay / Halsey Taylor 31341C Fan Motor.

The Elkay / Halsey Taylor 40619C Tailpipe Ferrule is for Elkay and Halsey Taylor drinking fountains.

The tailpipe ferrule surrounds the drain on the top of the drinking fountain.

The Elkay / Halsey Taylor 40572C Tailpipe 1-7/8” is 1-7/8”.

The tailpipe refers to the pipe running from the drain down to the waste line.

The Elkay / Halsey Taylor 20397C Tailpipe 5” is a 5” tailpipe.

The tailpipe is the part of the pipe from the drain down to the waste line.

The Elkay / Halsey Taylor 40575C Drain Assembly includes the drain strainer and the chrome-plated ferrule.

The Elkay / Halsey Taylor 22574C Regulator Mounting Bracket fits in Elkay and Halsey Taylor drinking fountains.

The regulator mounting bracket holds the housing and cartridge regulator in place.

The Elkay 40322C Stream Breaker threads into bubbler parts #101066 and #107271. It comes with a diverter assembly.

The stream breaker creates a smooth flow of water out of the bubbler head.

The Elkay 45336C Drain Assembly threads into the drain. The assembly includes the drain flange and strainer.

The Elkay / Halsey Taylor 15005C Cartridge Retaining Nut is a plastic nut that holds the cartridge in the housing. This coarse thread nut is for use with newer coarse thread housings.

The Halsey Taylor 60-14829-51-550 Plastic Stem Assembly fits Halsey Taylor drinking fountains.

The stem assembly threads into the valve body housing to control the water flow.

The Halsey Taylor 60-08240-51-640 Push Button Assembly is for use on Halsey Taylor drinking fountains. The assembly includes parts for a brass push button with chrome plating.

Pressing the push button activates water flow.

The Halsey Taylor 16-02705-08-640 Strainer Plate fits Halsey Taylor drinking fountains. The strainer plate is brass and chrome-plated.

The Halsey Taylor 60-07553-51-590 Push Button Rod Kit is designed for use in Halsey Taylor drinking fountains.

The push button rod presses on the water valve to turn on the water flow in the drinking fountain.

The Halsey Taylor 60-06429-51-590 Push Button Rod Kit is designed for use in Halsey Taylor drinking fountains.

The push button rod presses on the water valve to turn on the water flow in the drinking fountain.

The Halsey Taylor 60-08250-51-550 Twist Valve Repair Kit is for rebuilding twist valves in Halsey Taylor drinking fountains. The twist valve is located on the side of the drinking fountain.

The Elkay / Halsey Taylor 11-14117-43-620 Nut 1/4” is a self-threading stamped nut.

The nut threads onto plastic studs to secure a push bar in place.

The Elkay Cartridge Holder 50986C is used in most Elkay and Halsey Taylor drinking fountains. The housing holds the cartridge(not included). The housing has internal coarse threads for the cartridge retaining nut, and fine external threads for the nut that holds the housing in place. The water inlet and outlet are 1/4” quick connect fittings.

The Elkay / Halsey Taylor 50377C Drain Gasket is a common replacement when there is a leak under the drain.

The drain gasket prevents leaking from the drain.

The Elkay / Halsey Taylor 55884C Drain Elbow 1-1/4” is hard plastic and has a bottom threaded male end. It works with drain gasket #102742.

The drain elbow connects to the drain.

The Elkay / Halsey Taylor 10-03227-40-560 Flat Black Gasket is a a 1” diameter gasket.

The gasket is used to create a seal to prevent leaks.

The Elkay / Halsey Taylor 10031C Retaining Nut has two holes on top of the nut.

The retaining nut holds the cartridge regulator in the housing.