Oasis Drinking Fountain Parts

The Oasis 030562-001 Nozzle Stream Breaker is constructed of plastic with chrome plating. It threads into the bubbler, and fits both the “Bubbler with controls (#102574) and “Bubbler without controls” (#102575).

The nozzle stream breaker is used to straighten the stream of water as it flows from the bubbler head.

The Oasis 029967-001 Cartridge stainless steel cartridge is used inside the bubbler head or the water control assembly. It functions as both an on/off valve and a flow regulator.

The 027205 Oasis Waste Gasket fits between the basin and the drain assembly to create a watertight seal. The foam gasket has a flat bottom to seal to the drain assembly. The top of the gasket is formed to match the angle of the drinking fountain basin. When the basin screw is tightened the gasket is compacted to create a watertight seal.

The Oasis 018050 Waste Gasket fits against the bottom of the drain and the top of the waste assembly.

The waste gasket helps prevent internal leaking at the drain.

The Oasis 19131 Waste Gasket fits against the bottom of the drain and the top of the waste assembly.

The waste gasket helps prevent any internal leaking at the drain.

The Oasis 031756-001 Waste Gasket fits against the bottom of the drain and the top of the waste assembly.

The waste gasket helps prevent any internal leaking at the drain.

The Oasis / Sunroc A015671 Drain Gasket slips onto the drain adapter #102667 to create a seal to prevent water leaks.

The Oasis / Sunroc C026553 Drain Adapter is located immediately under the strainer.

To create a seal, the drain washer #102593 slips on top of the drain adapter.