Sunroc Drinking Fountain Parts

The Sunroc Water Control Assembly 10947-003-SP is found in most Sunroc water coolers. The valve assembly is located behind the front pushbar. The valve turns the water on and off as well as regulates the amount of water that flows out the bubbler head.

The Oasis 029967-001 Cartridge stainless steel cartridge is used inside the bubbler head or the water control assembly. It functions as both an on/off valve and a flow regulator.

The Sunroc C026293-SP Cobra Spout is a chrome-plated brass bubbler. This bubbler is found on most Sunroc drinking fountains.

This is a genuine Sunroc 11432-SP Cobra Spout Replacement Safety Guard.

The Sunroc D035956-18 Front Push Bar fits most Sunroc drinking fountains. This grey plastic push bar is the “push down” style with two stamped arrows on the face of the push bar. This pushbar attaches to the drinking fountain with three spacers and three screws that thread into the back of the push bar.

The Sunroc D035956-35 Front Pushbar fits most Sunroc drinking fountains. This tan plastic push bar is the “push down” style.

This is a genuine Sunroc C026315-05 Left Side Push Bar Grey.

This is a genuine Sunroc C026315-01 Left Side Pushbar – Suntan.

Chrome plated plastic.

This is a genuine Sunroc C026315-04 Right Side Pushbar Grey.

This is a genuine Sunroc C026315 Right Side Pushbar – Suntan.

The Oasis / Sunroc C026553 Drain Adapter is located immediately under the strainer.

To create a seal, the drain washer #102593 slips on top of the drain adapter.

The Oasis / Sunroc A015671 Drain Gasket slips onto the drain adapter #102667 to create a seal to prevent water leaks.

The Sunroc SFP-1002 Push Button is used on Sunroc drinking fountains with a rounded front. It works with the air valve #102550 and the mechanical valve #102556.

Pressing the push button activates water flow.

The Universal 7800 Bubbler Head Stainless Steel is a universal push button bubbler head. This bubbler is used on many different models of drinking fountains.

The Universal 1020888 Soft Top Bubbler Head Stainless Steel is a soft top bubbler head with a push button.

The Universal Bubbler Head Conversion Kit will retrofit older twist style valves to a push button bubbler head.

This Sunroc A020244 Screw is used to attach the pushbar to the drinking fountain.

This Sunroc A020241 Push Bar Spacer is used to attach the push bar to the drinking fountain. The screw goes through this spacer and attaches to the push bar.

This Sunroc A020596 Push Bar Spacer is used to attach the pushbar to the drinking fountain. The screw goes thru this spacer and attaches to the pushbar.

This Sunroc A020595 Screw is used to attach the front pushbar on Sunroc HCWC Series drinking fountains. This screw goes thru the spacer and attaches to the pushbar.