Elkay Cartridges / Housings / Strainers

Kit Includes:

• 1 – Cover
• 1 – Button
• 1 – Hex Nut
• 1 – Regulator Holder
• 1 – Retaining Nut
• 1 – Regulator

The Elkay / Halsey Taylor 22574C Regulator Mounting Bracket fits in Elkay and Halsey Taylor drinking fountains.

The regulator mounting bracket holds the housing and cartridge regulator in place.

The Elkay / Halsey Taylor 40089C Bonnet Nut Chrome is found on Elkay and Halsey Taylor drinking fountains. It is located just above the cartridge regulator.

The bonnet nut holds the push button.

The Elkay / Halsey Taylor 40048C Push Button Chrome is a chrome push button.

Pressing the push button activates water flow.

The Elkay / Halsey Taylor 10031C Retaining Nut has two holes on top of the nut.

The retaining nut holds the cartridge regulator in the housing.

The Elkay / Halsey Taylor 40169C Hex Nut Chrome is used to hold the cartridge regulator housing.

The Elkay / Halsey Taylor 40045C Hex Nut fits on Elkay and Halsey Taylor drinking fountains.

The hex nut holds the cartridge and housing in line. It also holds the housing to the mounting bracket.

The Elkay / Halsey Taylor 15005C Cartridge Retaining Nut is a plastic nut that holds the cartridge in the housing. This coarse thread nut is for use with newer coarse thread housings.

The Elkay Cartridge Holder 50986C is used in most Elkay and Halsey Taylor drinking fountains. The housing holds the cartridge(not included). The housing has internal coarse threads for the cartridge retaining nut, and fine external threads for the nut that holds the housing in place. The water inlet and outlet are 1/4” quick connect fittings.

The Elkay 92450C Cartridge Housing is used in Elkay and Halsey Taylor drinking fountains.

The housing holds the cartridge (NOT included) in place.

The Elkay Strainer 55996C is located at the water inlet of the drinking fountain. The strainer collects and traps any sediment that may damage the valve or other components of the drinking fountain. It fits Elkay and Halsey Taylor drinking fountains.

The Elkay / Halsey Taylor 60290C Cartridge Regulator is used in stainless steel, push button bubbler heads.

The cartridge regulator controls the on/off of water flow and the amount of water pressure.

This Elkay / Halsey Taylor 98530C Red Spring Cartridge Housing Kit is a pre-assembled kit that includes the red spring cartridge and the housing. This kit fits most Elkay and Halsey Taylor drinking fountains with a pushbutton.

The Elkay / Halsey Taylor 61313C Red Spring Cartridge Regulator is one of the most commonly replaced parts in a drinking fountain. It functions as both an on/off valve as well as an adjustable flow regulator. It is used on Elkay and Halsey Taylor drinking fountains with a pushbutton