Here Are The Most Common Elkay Drinking Fountain Parts

The Elkay / Halsey Taylor 56092C Plastic Tubing 1/4” x 48” is used in Elkay and Halsey Taylor drinking fountains.

The tubing is used as water lines within the drinking fountain.

Kit Includes:

• 10 – Pins
• 6 – Pivot Blocks
• 2 – Buttons

The Elkay 56229C Upper Shroud is for Elkay EZ series drinking fountains with front and side push bars. This shroud mounts between the upper basin and the main frame of the drinking fountain. The shroud assembly comes with the pushbars, switches, and wiring harness already installed.

The Elkay 56002C Side Push Bar fits on Elkay EZ series drinking fountains. This plastic push bar fits either the left or right side of the unit. When the user presses the push bar, it contacts the switches which send power to the solenoid and activate the water flow. On the back of the push bar there are two tabs that hold the handle in the shroud assembly.

The Elkay / Halsey Taylor 61314C Green Spring Cartridge Regulator is one of the most commonly replaced parts in a drinking fountain. It functions as both an on/off valve and a flow regulator.

The Elkay 51299C Replacement Filter (for EWF172) is a replacement filter for the EWF172 filter kit. It is designed to remove cysts, lead particles, and chlorine. It will also remove odors, and improve the taste of the water.

Kit Includes:

• 1 – Cover
• 1 – Button
• 1 – Hex Nut
• 1 – Regulator Holder
• 1 – Retaining Nut
• 1 – Regulator

The Elkay Cold Control Thermostat 31513C is an adjustable cold control thermostat. This thermostat controls the cooling system to regulate the temperature of the chilled water in most Elkay and Halsey Taylor drinking fountains. There are two male electrical terminals and one metal sensing lead.

The Elkay Bubbler Head Kit 92715C is used on most Elkay drinking fountains models. The “Flexi-Guard” flexible top helps prevent dental injuries. The bubbler comes with the mounting nut and a piece of 1/4 tubing. The tubing may not be necessary if you have plastic tubing connecting to the bubbler.

The Elkay Solenoid Valve 98466C is found in the Elkay EZ and Halsey Taylor HTV series water coolers with a model number that ends with an “C” or “D” or with a serial number that is higher than 0807xxxxx.
For Elkay / Halsey Taylor series water coolers with a model number that ends with a “A” or “B” or with a serial number that is lower than 0807xxxxx use part number 35981C

The Elkay Solenoid Valve 35981C is found in the Elkay EZ and Halsey Taylor HTV series water coolers with a model number that ends with an “A” or “B” or with a serial number that is lower than 0807xxxxx.
For Elkay / Halsey Taylor series water coolers with a model number that ends with a “C” or “D” or with a serial number that is higher than 0807xxxxx use part number 98466C

The Elkay Strainer 55996C is located at the water inlet of the drinking fountain. The strainer collects and traps any sediment that may damage the valve or other components of the drinking fountain. It fits Elkay and Halsey Taylor drinking fountains.

The Elkay/Halsey Taylor 98531C Green Spring Cartridge Housing Kit is a convenient pre-assembled kit. It will fit in most Elkay/Halsey Taylor drinking fountains with a front push bar and will solve most run on or water leaking issues. Housing is labeled “in” to show where to connect the supply line to, making it an easy installation.